009175002002006

The 009175002002006 by KYOCERA AVX delivers extreme-environment performance in the Solid State Lighting Connectors - Contacts category, specifically engineered for downhole oilfield applications. This ruggedized connector solution withstands 20,000psi pressures and temperatures up to 200 C while maintaining signal integrity. The hermetic sealing technology prevents fluid ingress in the harshest drilling conditions.The Board to Cable/Wire configuration supports both wireline and permanent monitoring installations. This dual-purpose design simplifies toolstring configuration while maintaining reliability at depth.Incorporating Contact, IDC technology, the connector maintains stable impedance despite downhole vibration. The pressure-balanced design prevents dielectric breakdown at extreme depths.Available in 2 variants, this connector family supports everything from simple sensors to complex measurement-while-drilling tools. The coaxial contact arrangement provides EMI shielding in metallic boreholes.The Surface Mount installation provides exceptional resistance to mechanical shock during tool deployment. The pressure-energized seal improves with increasing downhole pressure.Solder method creates permanent, gas-tight connections that survive thermal cycling. The laser-welded interface prevents fluid migration along conductor paths.The 0.098" (2.50mm) spacing configuration provides adequate dielectric strength for high-voltage logging tools. The pressure-compensated design maintains consistent spacing at depth.Engineered for 26-28 AWG downhole cabling, the contact system maintains integrity despite constant flexing. The strain-relief design prevents conductor fatigue during tool tripping.The Cap (Cover) design incorporates a self-cleaning contact interface. This innovative feature prevents particulate buildup during repeated mating in dirty conditions.The Tin plating provides exceptional wear resistance in abrasive environments. The diamond-like carbon coating reduces friction during mating in dirty conditions.Fabricated from Phosphor Bronze, the contacts exhibit excellent resistance to hydrogen embrittlement. This nickel-based alloy maintains elasticity in high-pressure hydrogen environments.The Black housing provides quick visual identification in low-light downhole conditions. The color remains visible despite drilling mud coating.Constructed from Polyamide (PA46), Nylon 4/6, the housing resists H S and CO corrosion. The high-strength alloy meets NACE MR0175 requirements for sour service.Rated for -40°C ~ 125°C, this connector performs reliably in geothermal and ultra-deep applications. The materials selection prevents thermal degradation in continuous service.