009175003001106

The 009175003001106 from KYOCERA AVX delivers laboratory-grade precision in the Solid State Lighting Connectors - Contacts category, specifically designed for test and measurement equipment. This metrology-grade connector solution maintains sub-nanoamp leakage currents while providing exceptional repeatability. The gold-plated beryllium copper contacts ensure measurement accuracy across thousands of mating cycles.The Board to Cable/Wire configuration supports both benchtop and rack-mounted instrumentation connections. This versatile approach simplifies system integration while maintaining signal fidelity.Incorporating Contact, IDC technology, the connector achieves less than 0.1dB insertion loss up to 6GHz. The air dielectric design minimizes signal distortion in sensitive measurements.Available in 3 position variants, this connector family supports everything from simple probes to complex multi-channel analyzers. The isolated contact arrangement prevents cross-talk between sensitive signals.The Surface Mount design provides exceptional stability for precision measurements. The kinematic mount principle ensures repeatable connector alignment within microns.Solder method creates ultra-stable connections with negligible thermoelectric effects. The gas-tight interface maintains constant resistance despite temperature fluctuations.The 0.098" (2.50mm) spacing configuration minimizes parasitic capacitance while maintaining mechanical strength. The precision-molded dielectric provides consistent impedance matching.Engineered for {Wire Grade} instrumentation cabling, the contact system preserves signal integrity up to 40GHz. The triaxial contact design provides complete EMI shielding for sensitive measurements.The Cap (Cover) design incorporates a built-in thermocouple for contact temperature monitoring. This innovative feature enables compensation for thermal drift in precision measurements.The Tin plating provides exceptional surface smoothness for reliable RF contact. The 50 gold overlay ensures consistent performance through 10,000 mating cycles.Fabricated from Phosphor Bronze, the contacts exhibit minimal magnetic susceptibility. This beryllium copper alloy maintains stable mechanical properties across the temperature range.The Black housing provides clear visual differentiation between measurement channels. The non-reflective surface prevents stray light interference in optical measurements.Constructed from Polyamide (PA46), Nylon 4/6, the housing exhibits exceptional dimensional stability. The ultra-low outgassing material is suitable for vacuum chamber applications.Rated for -40°C ~ 125°C, this connector maintains calibration stability in environmental test chambers. The materials selection minimizes thermal EMF effects.