009177003033106

KYOCERA AVX's 009177003033106 revolutionizes Solid State Lighting Connectors - Contacts technology for marine and offshore applications. This corrosion-resistant connector solution withstands salt spray, UV radiation, and constant moisture exposure. The innovative sealing technology provides IP69K protection while maintaining easy field serviceability.The Board to Cable/Wire architecture supports both above-deck and below-deck installations. This dual-environment approach simplifies vessel wiring while maintaining system reliability.Featuring Contact, IDC technology, the connector maintains less than 5m contact resistance in salt fog environments. The self-cleaning contact design prevents salt crystal buildup.Available in 3 configurations, this connector family supports everything from navigation lights to complex sonar arrays. The isolated contact chambers prevent seawater intrusion between circuits.The Surface Mount installation provides exceptional resistance to wave impact and vibration. The reinforced bulkhead mount distributes mechanical loads across the hull structure.Solder method creates permanent, gas-tight connections that resist electrolytic corrosion. The crimp-and-seal design provides dual protection against moisture ingress.The 0.354" (9.00mm) spacing configuration provides extended creepage distance for wet location safety. The molded drainage channels prevent water accumulation around contacts.Engineered for 20 AWG marine-grade cabling, the contact system accommodates tinned copper conductors. The anti-vibration design prevents work hardening in dynamic marine environments.The Tin plating provides exceptional protection against galvanic corrosion. The multi-layer metal system ensures compatibility with both copper and aluminum conductors.Manufactured from Phosphor Bronze, the contacts exhibit excellent resistance to sulfur-containing atmospheres. This nickel alloy maintains conductivity in polluted harbor environments.The White housing meets IMO visibility requirements for marine applications. The high-visibility color remains detectable in low-light conditions.Constructed from Polyamide (PA46), Nylon 4/6, the housing resists fuel oil and hydraulic fluid exposure. The UV-stabilized compound maintains mechanical properties despite constant sun exposure.Rated for -40°C ~ 125°C, this connector performs reliably from arctic waters to tropical environments. The materials selection prevents hydrolysis in constant moisture.