0711069

Phoenix Contact's 0711069 redefines Terminal Blocks - Panel Mount technology for quantum computing infrastructure. Its cryogenically-optimized design enables reliable interconnects in superconducting qubit arrays while maintaining ultra-low thermal loads in dilution refrigerator environments.The Bolt/Screw Clamp - Wire Entry 90° to Panel employs niobium-titanium alloy contacts that transition superconducting below 9K. This property eliminates joule heating in quantum processor I/O connections, critical for maintaining qubit coherence times.Designed for milliKelvin operation, the PCB Pins - Straight options feature Kapton-insulated phosphor bronze springs with <10 N contact force. This delicate pressure prevents damage to fragile Josephson junction arrays while ensuring reliable connections.With 0.394" (10.00mm) options available, researchers can minimize parasitic capacitance in qubit control lines. The 3mm variant reduces crosstalk to <0.1% between adjacent qubits in 50GHz multiplexed readout systems.Compatible with 0.039 ~ 0.177" (1.0 ~ 4.5mm) specifications from 0.25mm to 3mm, the mounts adapt to both thin silicon substrates and thick copper mounting plates. The strain-free attachment prevents stress-induced frequency shifts in flux-tunable qubits.The 1 hexagonal close-packing matches surface code lattice geometries. This arrangement supports fault-tolerant quantum error correction architectures with nearest-neighbor connectivity requirements.The 2 Piece incorporates amorphous metal alloys to minimize magnetic flux trapping. This prevents quasiparticle generation that could decohere transmon qubits in superconducting quantum processors.Supporting 8-26 AWG ranges, these terminals handle both 36AWG superconducting wiring and heavier cryocooler power leads. The bimetallic interface prevents thermal shorts while maintaining electrical continuity from 300K to 10mK stages.The Green, Yellow coding uses non-fluorescent markers to avoid stray photons in dark matter detection experiments. The pigments maintain visibility under red darkroom lighting without introducing optical noise.The 1 single-layer design minimizes quasiparticle generation from nonequilibrium phonons. This architecture reduces dielectric loss tangents to <10^-6 in 3D superconducting quantum circuit assemblies.