1071185
Phoenix Contact
1071185
Phoenix Contact
PCB TERMINAL BLOCK, NOMINAL CURR
Reference Price (USD)
1+
$4.20000
500+
$4.158
1000+
$4.116
1500+
$4.074
2000+
$4.032
2500+
$3.99
Exquisite packaging
Discount
TT / Paypal / Credit Card / Western Union / Money Gram
1071185
$4.20
Product details
Optimized for medical imaging equipment, the 1071185 from Phoenix Contact represents a breakthrough in Terminal Blocks - Wire to Board technology. This medical-grade terminal block meets IEC 60601-1 safety standards, featuring ultra-low leakage current for patient-connected systems. The 510KBA-BAAG is specifically designed for MRI machines, CT scanners, and other sensitive diagnostic equipment.The 1 non-magnetic architecture prevents imaging artifacts. Titanium construction ensures compatibility with 3T magnetic fields while providing galvanic isolation.Featuring 8 filtered contacts, the block suppresses RF interference. Each position incorporates -type filters that attenuate noise above 128MHz by 40dB.0.150" (3.81mm) spacing prevents capacitive coupling in high-Z circuits. The air-gap design maintains 10pF maximum inter-channel capacitance.45° (135°) Angle with Board alignment facilitates sterile field cable management. The radiolucent angled variants don't interfere with X-ray or gamma ray imaging.Precision-rated for 13.5 A bio-signal transmission, the contacts use non-polarizing materials. The balanced impedance design maintains signal fidelity for microvolt-level measurements.The 160 V patient isolation exceeds Means of Protection requirements. Class Y1 insulation materials provide two levels of protection against defibrillator pulses.Through Hole installation meets operating room cleaning protocols. The crevice-free surface withstands 1000+ autoclave cycles at 134 C.The Screwless - Leg Spring, Push-In Spring system enables one-handed operation with surgical gloves. Tactile feedback confirms proper engagement without visual confirmation.Interlocking (Side), Lever Actuated include integrated current-limiting fuses. The fail-safe design ensures open-circuit conditions during single-fault scenarios.The Black coding follows IEC 80001 risk management protocols. High-contrast markings remain visible under surgical lighting conditions.
Product Attributes
- Product Status: Active
- Number of Levels: 1
- Positions Per Level: 8
- Pitch: 0.150" (3.81mm)
- Mating Orientation: 45° (135°) Angle with Board
- Current: 13.5 A
- Voltage: 160 V
- Wire Gauge: -
- Mounting Type: Through Hole
- Wire Termination: Screwless - Leg Spring, Push-In Spring
- Features: Interlocking (Side), Lever Actuated
- Color: Black
You May Also Be Interested In
