1095509

The 1095509 from Phoenix Contact is a cutting-edge Terminal Blocks - Panel Mount designed for next-generation aerospace applications. Featuring space-grade materials, this terminal block ensures flawless signal transmission in extreme conditions from stratospheric altitudes to deep space environments.The Header, Male Pins system utilizes gold-plated molybdenum contacts that maintain stable resistance across -200 C to +300 C thermal cycles. This reliability is critical for satellite payload connections experiencing 16 sunrises per day in LEO orbits.Engineered with hermetic sealing, the Bolt/Screw Clamp - Wire Entry Parallel to Panel option provides outgassing rates below 1 10^-6 Torr-L/sec/cm , meeting NASA-STD-6012 requirements for vacuum applications in space telescopes and Mars rovers.Available in 4.183" (106.25mm) configurations, these terminals enable optimized PCB layouts for miniaturized CubeSat systems. The ultra-slim 5mm variant reduces mass by 60% while maintaining MIL-STD-883 shock resistance for launch vehicle applications.Compatible with 0.079 ~ 0.197" (2.0 ~ 5.0mm) specifications from 0.5mm to 6mm, the mounts adapt to both lightweight honeycomb panels and reinforced bulkheads. The iso-static mounting prevents stress concentrations in zero-G environments.The 16 matrix supports redundant ring-bus architectures essential for fault-tolerant flight control systems. This topology ensures continuous operation even with multiple point failures in avionics networks.The Screw Mount - Front Flange incorporates vibration-damping alloy springs that survive 100G mechanical shock pulses per MIL-STD-810. This performance exceeds requirements for rocket-mounted telemetry systems during max-Q phase.Precision 0.200" (5.08mm) spacing prevents corona discharge in thin-atmosphere conditions. The polyimide insulation maintains dielectric strength at 0.1 Torr pressures encountered in high-altitude UAV applications.Supporting 12-24 AWG ranges, these terminals accommodate both micron-scale thermocouple leads and heavy-gauge power distribution cables. The shape-memory alloy contacts compensate for thermal expansion differences in composite airframe installations.The Green coding uses phosphorescent markers for tool-free identification during EVA repairs. The pigments remain visible through astronaut gloves while resisting atomic oxygen degradation in ISS environments.Incorporating Threaded Mating Lock, this series meets ESA ECSS-Q-ST-70-02 cleanliness standards. The particle-free design prevents contamination in optical payloads while maintaining >10^12 insulation resistance in cryogenic conditions.The 1 single-plane construction minimizes magnetic susceptibility for star tracker applications. This configuration reduces compass deviation to <0.1 in Earth observation satellites.