17-111274

Conec's 17-111274 sets new standards in Modular Connectors - Adapters for high-energy physics experiments. Designed for particle accelerators, this adapter maintains ultra-high vacuum integrity while handling multi-kilovolt potentials in detector instrumentation.The Jack, 8p8c (RJ45) interface employs ceramic feedthroughs that maintain <10^-11 mbar l/sec leak rates under 30kV DC bias, critical for time projection chambers in neutrino detection.For Jack, 8p8c (RJ45) connections, the adapter implements radiation-hardened materials that withstand >1MGy dose while maintaining <1pA leakage currents in calorimeter systems.This Coupler solution features ultra-low noise (<100e^- rms) contacts for silicon pixel detectors while providing 100kV/cm dielectric strength in drift tube applications.Incorporating Cap (Cover), Circular Bayonet Coupling, Industrial Environments, the connector achieves 10^15 ohm insulation resistance at 77K temperatures for superconducting magnet instrumentation in fusion research.The IP67 - Dust Tight, Waterproof rated enclosure withstands 100kRad/hr gamma radiation fields while maintaining mechanical integrity in hadron collider experiments.Panel Mount, Bulkhead configuration includes non-conductive coatings that prevent electron multipacting effects in RF cavities operating at 10^-9 Torr vacuum.Precision Front Side Nut alignment ensures <5 m positioning accuracy for silicon strip detectors in vertex tracking systems.Exceeding Cat5e requirements, the adapter demonstrates <0.1% capacitance variation under 5T magnetic fields for muon spectrometer applications.With Shielded technology, the connector provides 120dB rejection against 60Hz interference from magnet power supplies in precision measurement systems.The Copper Alloy, Nickel Plated construction meets CERN radiation hardness specifications (SEU <10^-9 errors/bit/day) while maintaining UHV compatibility in beamline instrumentation.