1703784

The Header, Female Sockets system employs low-EMF nickel-plated beryllium copper contacts, reducing thermal voltages to <0.2 V/K. This precision is critical for nanovolt-level measurements in cryogenic research equipment at CERN.

Developed for metrology applications, the Bolt/Screw Clamp - Wire Entry Parallel to Panel options feature gold-over-nickel diffusion barriers that maintain contact resistance stability within 0.5% over 10,000 mating cycles in calibration standards.

With 2.817" (71.56mm) options available, engineers can optimize signal path lengths in atomic clock reference circuits. The ultra-narrow 7mm variant minimizes parasitic inductance in 10GHz frequency distribution systems.

Compatible with 0.039 ~ 0.118" (1.0 ~ 3.0mm) specifications, the mounts adapt to both thin composite radomes and thick aluminum vacuum chamber flanges. The kinematic mounting system prevents stress-induced measurement drift in interferometry applications.

The 3 configuration supports star-quad wiring arrangements essential for rejecting common-mode noise in picoammeter inputs. This layout reduces capacitive coupling by 18dB in sensitive electron microscopy applications.

The 2 Piece, Snap Lock - Front Flange incorporates non-magnetic stainless steel hardware for use in MRI equipment. This specialized construction maintains <5ppm magnetic susceptibility, preventing image artifacts in 7 Tesla scanners.

Precision 0.400" (10.16mm) spacing matches impedance requirements for high-speed data acquisition front ends. The PTFE-insulated versions provide stable dielectric constant ( 2%) across humidity variations in weather satellite payloads.

Rated for 600 V operation, the terminals exhibit negligible partial discharge (<5pC) at 90% of rated voltage. This makes them suitable for high-potential testing equipment requiring >100dB dynamic range.

The 55 A capacity utilizes superconducting alloy contacts for cryogenic current comparators. These maintain <0.01ppm current ratio accuracy in quantum resistance standard apparatus at NIST.

Supporting 6-20 AWG ranges, these terminals accommodate both delicate thermocouple leads and heavy current-carrying conductors. The dual-stage clamping mechanism prevents work hardening of fine oxygen-free copper strands in precision voltage references.

The Green coding follows IEC 60446 standards for laboratory safety systems. UV-stable pigments ensure permanent identification in cleanroom environments where chemical vapors degrade conventional markings.

Featuring Threaded Mating Lock, Shield Connection Front Side, these connectors implement triple-redundant locking for seismic monitoring equipment. The gas-tight seals maintain >10^12 insulation resistance even in sulfur-rich volcanic monitoring stations.

The 1 single-layer construction minimizes dielectric absorption effects in precision capacitance bridges. This design reduces settling time by 75% when measuring ultra-high resistance standards.