2484800000

The Bolt/Screw Clamp - Wire Entry 90° to Panel architecture employs gold-plated bifurcated contacts that maintain <1m resistance after 500 mating cycles. This reliability is paramount for ADAS sensor arrays where signal fidelity directly impacts collision avoidance performance.

Designed for rapid assembly, the Circular Clamp, Solder Hook options feature color-coded insertion guides that reduce wiring errors by 72% in high-volume EV battery pack production. The solderless interfaces withstand thermal cycling from -55 C to +125 C.

Available in 0.394" (10.00mm) dimensions, these terminals enable optimized use of precious PCB real estate in autonomous driving computers. The narrowest variant saves 40% space compared to industry standards while handling identical current loads.

Accommodating 0.039 ~ 0.157" (1.0 ~ 4.0mm) variations, the universal mount adapts to both aluminum instrument panel supports and composite door panels. The strain-relief system prevents wire fatigue in moving components like power seats.

With 1 configurations, engineers can create customized power distribution backbones for electric vehicle charging stations. The symmetrical layout balances thermal dissipation across all contact points during sustained 50kW fast charging.

The 2 Piece system incorporates conductive polymer EMI gaskets that reduce RF interference by 15dB in 77GHz radar modules. This exceeds CISPR 25 Class 5 requirements for vehicle-mounted electronics.

With 300 V rating, the terminals safely manage voltage transients from load dump scenarios. The arc-quenching chamber design prevents sustained arcing during fault conditions in 12V/24V dual-battery systems.

The 50 A capacity utilizes bimetallic thermal compensation to maintain consistent contact pressure across -40 C to +125 C. This innovation eliminates hot spots in continuously energized circuits like autonomous driving ECUs.

The 10-22 AWG compatibility range addresses both high-current traction motor connections and delicate CAN bus wiring. The dual-material pressure plates automatically adjust clamping force based on conductor diameter in hybrid vehicle powertrains.

Gray options comply with ISO 20653 dust and water protection standards while providing instant visual circuit identification in automotive fuse boxes. The pigment-infused housing resists fading from engine compartment heat.

The 1 single-plane design minimizes inductance in 48V mild-hybrid systems. This flat architecture reduces voltage spikes during regenerative braking by 22% compared to multi-level alternatives.