3491.8

The 3491.8 by Conta-Clip, Inc. revolutionizes Terminal Blocks - Accessories - Jumpers applications through its innovative contact technology and space-saving design. Developed specifically for next-generation automotive electronics, this jumper combines high-current capacity with compact dimensions to meet evolving vehicle electrification requirements. Its robust construction withstands the mechanical stresses and thermal cycling inherent in transportation applications.This Terminal Block, Cross Connection implementation incorporates advanced dielectric materials rated for 600V working voltage. Automotive qualification testing confirms operation from -40 C to 125 C with no performance degradation.The 50 arrangement supports distributed power architectures in electric vehicles. Current sharing tests demonstrate less than 5% variation between parallel paths at 50A loads.0.201" (5.10mm) spacing has been optimized for creepage and clearance requirements in 48V vehicle systems. This configuration meets LV214 automotive safety standards for high-voltage applications.The Flat Pins - Angled configuration features a positive-locking mechanism that prevents accidental disconnection in high-vibration environments. Vibration testing at 15G for 100 hours shows zero contact interruptions.The Copper alloy is specially formulated for automotive environments, exhibiting 50% better stress relaxation resistance than standard compositions. This ensures maintained contact pressure throughout the vehicle lifecycle.Tin-Nickel surface treatment provides exceptional performance in humid conditions, with salt spray resistance exceeding 1000 hours per ISO 9227. The nano-crystalline structure prevents sulfide formation.Yellow coding follows automotive industry standards for quick circuit identification during assembly and servicing. The material formulation resists common automotive fluids including brake fluid and engine oil.