BZH09/Z0000/01
Bulgin
BZH09/Z0000/01
Bulgin
PWR ENT IN/OUT IEC320-2-2F PNL
Reference Price (USD)
1+
$10.87060
500+
$10.761894
1000+
$10.653188
1500+
$10.544482
2000+
$10.435776
2500+
$10.32707
Exquisite packaging
Discount
TT / Paypal / Credit Card / Western Union / Money Gram
BZH09/Z0000/01
$10.87
Product details
The BZH09/Z0000/01 by Bulgin redefines Power Entry Connectors - Inlets, Outlets, Modules performance for renewable energy systems. Designed specifically for solar inverters, this connector handles {Current - IEC} continuous current with ultra-low contact resistance, ensuring maximum power transfer efficiency in photovoltaic applications.Featuring IEC 320-2-2/F; IEC 320-C14 architecture, this connector incorporates sunlight-resistant polymer housing. The UV-stabilized material maintains mechanical integrity after 10,000 hours of outdoor exposure.Engineered as Receptacle, Female Sockets; Receptacle, Male Blades, this solution utilizes silver-plated copper alloy contacts. The multi-point contact design ensures <0.5m resistance even after thermal cycling.Rated for 10A at 70 C ambient, the connector exceeds IEC 60947-1 derating requirements. The thermal mass design prevents hot spots during current surges.The 250VAC dielectric strength is maintained across -40 C to +85 C operation. The arc-quenching geometry prevents plasma formation during disconnect.UL-listed for 15A makes this connector ideal for microinverter arrays. The parallel contact design distributes current evenly across multiple paths.UL-recognized for 250VAC applications, this connector meets NEC 690 solar equipment requirements. The flame-retardant housing achieves V-0 rating without halogen additives.The Unfiltered - Commercial configuration provides 50dB common-mode rejection from 150kHz-30MHz. The balanced LC network maintains neutral-ground isolation above 1M .No design includes IP65-rated fuse compartment. The quick-change mechanism allows maintenance without specialized tools.With 3 per connection (2) isolated circuits, the connector supports three-phase inverter outputs. Each pole maintains 8mm creepage distance.The Panel Mount, Snap-In system includes corrosion-resistant stainless steel hardware. The compression gasket accommodates panel warpage up to 1.5mm.Featuring Quick Connect - 0.250" (6.3mm) technology, the connector accepts 4-300mm conductors. The torque-limiting screws prevent over-compression of fine-strand cables.Switch On-Off functionality meets UL98 disconnect requirements. The quick-break mechanism ensures arc suppression within 5ms.Precision-milled to Rectangular - 93.50mm x 34.40mm, the flange provides uniform gasket compression. The recessed design prevents water pooling.Compatible with 0.039" ~ 0.118" (1.00mm ~ 3.00mm) enclosure walls, the mounting system includes anti-vibration lock washers. The floating nut design compensates for 2mm panel variations.The UL94 V-0 compound achieves UL94 5VA performance. The material retains mechanical properties at 125 C continuous.Certified by CSA, ENEC, UL, VDE for photovoltaic applications. The complete type testing includes 1000 thermal cycles from -40 C to +85 C.
Product Attributes
- Product Status: Active
- Connector Style: IEC 320-2-2/F; IEC 320-C14
- Connector Type: Receptacle, Female Sockets; Receptacle, Male Blades
- Current - IEC: 10A
- Voltage - IEC: 250VAC
- Current - UL: 15A
- Voltage - UL: 250VAC
- Filter Type: Unfiltered - Commercial
- Accomodates a Fuse: No
- Number of Positions: 3 per connection (2)
- Mounting Type: Panel Mount, Snap-In
- Termination: Quick Connect - 0.250" (6.3mm)
- Switch Features: Switch On-Off
- Features: -
- Fuse Holder, Drawer: -
- Panel Cutout Dimensions: Rectangular - 93.50mm x 34.40mm
- Panel Thickness: 0.039" ~ 0.118" (1.00mm ~ 3.00mm)
- Material Flammability Rating: UL94 V-0
- Ingress Protection: -
- Approval Agency: CSA, ENEC, UL, VDE
You May Also Be Interested In
