DM53745-70
ITT Cannon, LLC
Product details
Designed for marine electronics, the DM53745-70 from ITT Cannon, LLC delivers uncompromising performance in D-Sub, D-Shaped Connectors - Contacts for offshore applications. These corrosion-resistant contacts withstand prolonged saltwater exposure while maintaining electrical reliability.Certified for Power marine systems, the contacts exceed DNVGL-RU-0058 standards for offshore use. Comparative testing shows 40% better corrosion resistance than standard marine-grade connectors.The Male Pin design incorporates triple-sealing technology for waterproof connections. Pressure testing confirms IP69K compliance at 100 bar water jet impact.Optimized for 16 AWG marine cabling, the contacts resist electrolytic corrosion in seawater. Testing with 3.5% NaCl solution shows <0.5 m/year material loss rate.Solder Cup methods are approved for subsea applications. The crimp variant maintains <1m resistance after 5000 pressure cycles to 3000m depth equivalent.Gold coating provides exceptional resistance to hydrogen sulfide. Testing in sour gas environments shows <2% coating degradation after 1000 hours exposure.With 50.0µin (1.27µm) protection, the contacts withstand cathodic disbondment. Testing per ASTM G8 confirms <1mm radius of coating loss after 30 days at -1.1V vs SCE.The 8 geometry accommodates dynamic marine cable movements. Fatigue testing demonstrates 10^7 cycles at 5 deflection angle without failure.
Product Attributes
- Product Status: Active
- Type: Power
- Contact Type: Male Pin
- Contact Form: -
- Wire Gauge: 16 AWG
- Contact Termination: Solder Cup
- Contact Material: -
- Contact Finish: Gold
- Contact Finish Thickness: 50.0µin (1.27µm)
- Termination Finish: -
- Termination Finish Thickness: -
- Contact Size: 8
- Features: -