MLX81120KLW-AAD-999-SP

The MLX81120KLW-AAD-999-SP by Melexis Technologies NV pioneers ultra-low-power design in Embedded - Microcontrollers - Application Specific, specifically developed for energy harvesting applications. This application-specific microcontroller operates down to 0.8V supply voltage, enabling battery-less IoT deployments with multi-year operation.Tailored for LIN Controller scenarios, the device includes nanowatt-range wake-up receivers. The energy-aware architecture achieves 98% duty cycle reduction through predictive sleep scheduling.Built around 16-Bit RISC technology, the CPU features subthreshold operation modes. The event-driven architecture consumes just 12 A/MHz during active processing.The FLASH (32kB), ROM (16kB) organization supports shadow register banking for zero-energy state retention. The non-volatile memory maintains data at 0V supply through ferroelectric technology.The 2K x 8 memory implements ferroelectric retention for zero-power sleep. The memory controller includes energy-proportional access modes that scale with workload.Featuring UART connectivity, the device includes sub-1GHz RF frontends. Each communication peripheral implements adaptive impedance matching for energy-optimized transmission.With 4 ports, the GPIO subsystem features piezoelectric driver circuits. Configurable charge pumps enable direct energy harvesting from mechanical vibrations.Operating from 5.5V ~ 18V sources, the power management unit starts at 300mV input. The integrated maximum power point tracker optimizes energy extraction from solar cells.Rated for -40°C ~ 125°C (TA) operation, the device uses zero-leakage transistors. The package design minimizes thermal gradients that could affect energy harvesting efficiency.The Surface Mount configuration supports flexible PCB installations. The ultra-thin package enables integration into wearable form factors.The 12-VFDFN Exposed Pad option features transparent lids for solar cell integration. The package material selection maximizes light transmission to underlying photovoltaic layers.Available in 12-DFN (4x4) format, each unit is tested with actual energy harvesting sources. Production includes verification of cold-start capability.